go directly to Main Navigation, Catalog Navigation, Search, Category Navigation, Main Content, Footer Navigation




HP 3000-10G-PoE+ Wireless Switch

HP 3000-10G-PoE+ Wireless Switch

Price and buy

The HP WX3000-10G Wireless Switch comprises of a wired and wireless unified switches that integrate both a wireless controller and 1000 Mbps Ethernet switch functions. The WX3000-10G switch provide eight 1000 Mbps Ethernet ports,
each supporting a maximum power of 30W, PoE+ (draft), plus two additional combo ports supporting up to 24 IEEE 802.11a/b/g/n APs, while delivering unified wired and wireless access control functions. The WX3000-10G switch is suitable for branches of large enterprise networks that require both wired and wireless access services.
Wireless networking Features
Quality of Service (QoS)
IEEE 802.1p prioritization: delivers data to devices based on the priority and type of traffic
Class of Service (CoS): sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ
Automatic radio power adjustment: automatic AP power adjustment features analyze user access status in real time, adapting power requirements based on environmental changes and providing high-quality user access signal coverage
Automatic radio channel adjustment: intelligent channel switching and real-time interference detection provide the allocation of a high-quality channel to each AP, reducing adjacent channel interference
Load balancing: intelligent load sharing analyzes the locations of wireless clients in real time, providing high-quality client throughput regardless of location or number of online sessions
Rogue AP detection: regular scans for rogue APs help confirm that the network is secure
IEEE 802.3at draft Power over Ethernet (PoE+) support: simplifies deployment and dramatically reduces installation costs by helping to eliminate the time and cost involved in supplying local power to each access point location
IEEE 802.11h ITU compliant: employs Dynamic Frequency Selection (DFS) to automatically select another channel and adjust transmit power to reduce interference with systems such as radar, if detected on that same channel
Loopback: supports internal loopback testing for maintenance purposes and an increase in availability; loopback detection protects against incorrect cabling or network configurations and can be enabled on a per-port or per-VLAN basis for added flexibility
Optional 10 Gigabit Ethernet ports for 3000-24G-PoE+ wireless switch: add 10 Gigabit Ethernet connections for uplinks or high-bandwidth server connections through 3000-24G-PoE+ extended slots; flexibly supports XENPAK or XFP-style 10 Gigabit transceivers
Built-in IEEE 802.1X and portal authentication servers: the WX3000G series provides a built-in IEEE 802.1X authentication server that supports multiple IEEE 802.1X authentication modes, such as TLS, PEAP, and MD5; the series also provides a built-in portal server that can authenticate users having no security authentication client installed; both features are economical and easy-to-use solutions for small- to medium-sized enterprise networks
Flexible forwarding modes: the WX3000G series supports both distributed forwarding mode and centralized forwarding mode, allowing you to set SSID-based forwarding types as needed; in a wireless network with centralized forwarding mode, all wireless traffic is sent to an AC for processing; if there is a wireless network in which APs are deployed at branches, ACs are deployed at the headquarters, and APs and ACs are connected over a WAN, the distributed mode will be necessary
Fast roaming: supports Layer 3 roaming and fast roaming, satisfying the most demanding voice service requirements
High performance: robust switching capacity and wire-speed processing provide powerful forwarding capacity for medium and large enterprise-sized WLANs
Web interface: allows configuration of the switch from any Web browser on the network
Layer 2 switching
VLAN support and tagging: support IEEE 802.1Q with 4,094 simultaneous VLAN IDs
Spanning Tree Protocol (STP): fully supports standard IEEE 802.1D STP, IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) for faster convergence, and IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
Port mirroring: duplicates port traffic (ingress and egress) to a local or remote monitoring port
: 8 RJ-45 dual-personality 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
Media Type: Auto-MDIX
Duplex: 10BASE-T/100BASE-TX: half or full
1000BASE-T: full only
2 SFP 1000 Mbps ports
1 RJ-45 serial console port
AP characteristics
Radios: a/b/g/n
AP operation modes: Controlled; Autonomous
Physical characteristics
Weight: 2.9 kg
Dimensions: 11.81 x 10.59 x 1.72 in (30 x 26.9 x 4.36 cm)
Enclosure: Indoor
Nonoperating/Storage temperature: -40 to 70°C
Operating temperature: 32 to 113°F (0 to 45°C)
Electrical characteristics
Frequency band and operating channels
: UL 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; GOST; C-Tick; NOM; IEC 60950-1(with CB report)
: http://h18000.www1.hp.com/products/quickspecs/13890_div/13890_div.pdf
: Maximum number of users: 1,000; maximum number of users supported by local authentication: 1,000; maximum number of SSIDs that can be configured: 64; maximum number of users supported by local portal authentication: 1,000; number of ACLs: 2.

* HP is not liable for pricing errors. If you place an order for a product that was incorrectly priced, we will cancel your order and credit you for any charges. In the event that we inadvertently ship an order based on a pricing error, we will issue a revised invoice to you for the correct price and contact you to obtain your authorization for the additional charge, or assist you with return of the product. If the pricing error results in an overcharge to you, HP will credit your account for the amount overcharged.

** Lease products available through Hewlett-Packard Financial Services Company (HPFS) to qualified commercial customers in the U.S. and are subject to credit approval and execution of standard HPFS documentation. Lease prices shown are based upon HPFS’ current lease rates for premium risk rating customers (as determined by HPFS in its sole discretion). All customers may not qualify for this pricing. HPFS lease rates may vary depending upon HPFS’ credit review and approval of the customer and the transaction. Other restrictions may apply. HPFS reserves the right to change or cancel this program at any time without notice.

To download the latest Adobe® Reader® please go to the Adobe website at http://www.adobe.com. Adobe and Reader are trademarks of Adobe Systems Incorporated.

© 2014 Hewlett-Packard Development Company, L.P.

Footer Navigation