HP M110 Access Point (US)(J9385B)
Price and buy
HP M110 Access Point is an entry-level, single IEEE 802.11a/b/g radio device that can be configured to operate as an access point, a wireless distribution system (WDS) bridge, or a full-spectrum IEEE 802.11 wireless LAN (WLAN) monitor. The M110 Access Point supports up to two Virtual Service Communities, each with independent VLAN and wireless security profiles. It is plenum-rated and powered by an IEEE 802.3af(PoE)source. The M110 access point is Wi-Fi Certified for WPA2, WPA, and WEP security and has hardware-assisted AES and RC4 encryption.
|Wireless networking Features|
Quality of Service (QoS)
IEEE 802.1p prioritization: delivers data to devices based on the priority and type of traffic
Diagnostic: - Client event log records association, authentication, and DHCP events. - Packet capture tool for Ethernet and IEEE 802.11 interfaces (PCAP format). - Data rate matrix.
RF management: - Automatically selects channel on power-up and continuously improves channel selection based on background interference scan. - Configurable background rogue scanning. - Automatically adjusts transmit power to reduce interference.
Network management: SNMP v2c, SNMP v3, MIB-II with Traps, and RADIUS Authentication Client MIB (RFC 2618)Embedded HTML management tool with secure access (SSL and VPN)Scheduled configuration and firmware upgrades from central server
Auto-MDIX: automatically adjusts for straight-through or crossover cables on all 10/100 ports
IEEE 802.3af Power over Ethernet (PoE) support: simplifies deployment and dramatically reduces installation costs by helping to eliminate the time and cost involved in supplying local power at each access point location
Interoperability: Wi-Fi Alliance certifications, including IEEE 802.11g Wi-Fi and WPA2 to help ensure multivendor interoperability
Virtual Service Communities (VSCs): - Up to 2 SSIDs, each with a unique MAC address, and configurable SSID broadcasts . - Individual security profiles per VSC . - Configurable DTIM and minimum data rate per VSC. - Each VSC mapped to separate IEEE 802.1Q VLANs. - WMM and/or WMM-PS. - Security filter. - IP filter.
AP client access control functions: - IEEE 802.1X authentication using EAP-SIM, EAP-FAST, EAP-TLS, EAP-TTLS, and PEAP. - MAC address authentication using local or RADIUS access lists. - RADIUS AAA using EAP-MD5, PAP, CHAP, and MS-CHAPv2. - RADIUS Client (RFC 2865 and 2866) with location-aware support. - Layer 2 wireless client isolation.
Enhanced Security: - Configurable Ethernet MAC and protocol filters. - WPA2, WPA, and WEP. - IEEE 802.1X PEAP WLAN authentication. - Hardware-assisted AES and RC4 encryption.
Location flexibility: - 100 mW radio and antenna diversity provide excellent range. - Configurable IEEE 802.11 a/b/g radio with external antenna connectors. - Plenum rated. - Centrally manageable.
Choice of IEEE 802.11i, WPA2, or WPA: locks out unauthorized wireless access by authenticating users prior to granting network access; robust Advanced Encryption Standard (AES) or Temporal Key Integrity Protocol (TKIP) encryption secures the data integrity of wireless traffic
Local wireless bridge client traffic filtering: when enabled, prevents communication between wireless devices associated with the same access point
IEEE 802.1X: provides port-based user authentication with support for Extensible Authentication Protocol (EAP) MD5, TLS, TTLS, and PEAP with choice of AES, TKIP, and static or dynamic WEP encryption for protecting wireless traffic between authenticated clients and the access point
Warranty and support
Lifetime warranty: for as long as you own the product with advance replacement and next-business-day delivery (available in most countries)*
|:||1 RJ-45 autosensing 10/100 port(IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX), Duplex: half or full|
|AP operation modes:||Autonomous|
|Dimensions:||5 x 5.5 x 1.3 in. (12.7 x 13.97 x 3.3 cm)|
|Nonoperating/Storage temperature:||-40 to 80°C|
|Operating temperature:||32 to 122°F (0 to 50°C)|
|Description:||IEEE 802.11a High Speed Physical Layer in the 5 GHz Band; IEEE 802.11b Higher-Speed Physical Layer Extension in the 2.4 GHz Band; IEEE 802.11g Further Higher Data Rate Extension in the 2.4 GHz Band; IEEE 802.11i Medium Access Control (MAC) Security Enhancements|
|Maximum power rating:||5 W (maximum)|
|Frequency band and operating channels|
|Americas:||FCC: 2.412 GHz-2.462 GHz (1-11 channels); 5.180 GHz-5.240 GHz (36-48 channels); 5.745 GHz-5.825 GHz (149-165 channels); . EN: 2.412 GHz-2.472 GHz (1-13 channels); 5.180 GHz-5.240 GHz (36-48 channels);|
|:||UL 2043; UL 60950-1; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1|
|:||Maximum transmit power varies by country.|
* HP is not liable for pricing errors. If you place an order for a product that was incorrectly priced, we will cancel your order and credit you for any charges. In the event that we inadvertently ship an order based on a pricing error, we will issue a revised invoice to you for the correct price and contact you to obtain your authorization for the additional charge, or assist you with return of the product. If the pricing error results in an overcharge to you, HP will credit your account for the amount overcharged.
** Lease products available through Hewlett-Packard Financial Services Company (HPFS) to qualified commercial customers in the U.S. and are subject to credit approval and execution of standard HPFS documentation. Lease prices shown are based upon HPFS’ current lease rates for premium risk rating customers (as determined by HPFS in its sole discretion). All customers may not qualify for this pricing. HPFS lease rates may vary depending upon HPFS’ credit review and approval of the customer and the transaction. Other restrictions may apply. HPFS reserves the right to change or cancel this program at any time without notice.
To download the latest Adobe® Reader® please go to the Adobe website at http://www.adobe.com. Adobe and Reader are trademarks of Adobe Systems Incorporated.
© 2014 Hewlett-Packard Development Company, L.P.